The function of a bulletproof helmet is to prevent bullets and stray bullets, and its effect is obvious during a frontal confrontation. The bulletproof helmets produced by our company are divided into three types: GMK-PH, GJK-FH, and GZK-MH, using UHMWPE fiber "UD" weft free fabric as the substrate. Compared to traditional steel helmets, the material is light, bulletproof, comfortable to wear, and the bullet will not produce stray bullets and cause secondary damage after impact. According to various protection level standards, special process technology is designed and made by special mold hot pressing. This product has excellent properties such as light material, good bulletproof performance, resistance to various chemical corrosion, UV light resistance, waterproofing, and good concealment. It is currently widely accepted by countries around the world.

Product specifications：

Product model: GMK-PH01

Bulletproof material: aramid or uhmwpe.

Bulletproof execution standard: NIJ0101.04.

ballistic level: IIIA.

Protection area: 0.13 m2.

Size: One size fits all.

Attachment: chin strap, second-generation wire suspension system, and sponge pad.

Color: black, military green, Khaki, customizable. 

Single weight: 1.40 ± 0.05KG.

Packaging: 10 tops/box.

Performance content:

(1) Lateral rigidity performance of the helmet shell: The maximum deformation of the helmet should be less than or equal to 40mm, and the residual deformation should be less than or equal to 15mm.

(2) Flame retardant performance of non-metallic helmet shell: The ignition time on the outer surface of the helmet shell is less than or equal to 5 seconds.

(3) Strength performance of the lower forehead belt device: The firmness of the emergency release of the lower jaw belt is greater than 500N, and it can release or crack when the external force is greater than 1000N.

(4) Bullet proof performance: Fire 5 rounds of 9×19 mm Parabellum Carriage (lead core) with MP5 submachine gun Shooting distance is 5m In the case of 5 effective hits, helmet shall not be exceeded, and the height of the helmet shell bullet mark is less than or equal to 44mm.

(5) Water resistance: After soaking the bulletproof helmet in water for 24 hours at room temperature, there are no cracks, bubbles, or delaminations on the surface of the helmet shell.

(6) Environmental adaptability: Under the condition of environmental temperature ranging from -25 ℃ to+55 ℃, there are no cracks, bubbles, or delaminations on the surface of the helmet shell.

Main characteristics：

• PASGT design

• Aramid/UHMWPE material

• Significantly reduce weight

• Multi layered structure

• Durable and comfortable sling

• Leather and molded cushioning

• Provide ideal ballistic helmets for law enforcement, military, and private security contractors.